Sola Equipment

Sola Frames Complete Upgrade Kit including Wall Sliders and H-Block

Sola Equipment

Sola Frames Complete Upgrade Kit including Wall Sliders and H-Block

Complete upgrade kit for Sola Frames which includes a pair of H-Blocks, wall sliders, all the axles, mounting screws and Torx tool needed. This kit offers the best value for upgrading your frames but individual replacement sliders, H-Blocks and hardware available in the links below.

See below tabs for more deets.

Click here for details on colours we offer



You’ll earn 0 reward points with this purchase.

We spent a ton of time designing, testing and tweaking the unique Cake Quad Groove, we don't want to admit how many versions we have gone through but IT'S A LOT. We think it's the perfect balance between minimal wheel bite and optimal boot down angle for riding flat. Don't be fooled, huge wide grooves will help lock on but they do not help with wheel bite as they tend to be too deep resulting in wheels closer to the ledge or too large a groove radius so you don't get a solid lock in leading to slop and movement during slide. That's why we created the larger main groove with additional smaller 45° and fastslide grooves in the centre of the main groove allowing positive solid locks to pivot on for clean controlled switch ups. We've created maximum wheel bite protection wings possible without them getting in the way. Finally the edges are chamfered precisely to prevent the edges hanging up when carving hard but just enough left over to cess slide on the edge of the block instead of the wheels.

Is it obvious we obsess over this stuff?

These kits come with a pair of H-Blocks and your choice of two or four walls, we thought we'd give this option depending on if you do negative tricks or not and want to save a few pennies and a few grams weight.

All kits come with eight internally threaded axles and the required amount of M4 torx mounting screws (plus a few spares thrown in) along with a Torx tool perfect for the job.

These will fit any of the aggressive Sola frames currently on the market including the 60mm flat Street and JA Joe Atkinson 64/60mm Hi-Lo  frame.

Please be aware that ALL orders could take up to 4-6 weeks to be fulfilled depending on how busy our printers are. We are a small start up and have limited capacity. Every plastic part is printed on demand to your specifications just for you. To give you an idea, some parts can take up to a full 24 hours to print (i.e. ONE yeti one piece soulplate). If this wait is a problem, don't order.